3200mAh Sanyo NCR18650BL
NCR18650BL — 7A
Sanyo NCR18650BL cell is a wonderful cell with nominal capacity of 3200mAh which is one of the highest capacity cell in 18650 cells. It is famous for many electric vehicles like E-bikes because it has medium or high drain capability. 7amps of Max Constant Discharge can be delivered without any stress.
This is a top-in class choice in 18650 cells.
HIGHLIGHTS OF Sanyo NCR18650BL
- Positive Terminal: Flat Top
- Nominal Capacity: 3200mAh
- Continuous Discharge Current (max): 7A
- Nominal Voltage: 3.6V
- Discharge cut-off Voltage: 2.5V
- Charging Time: std.4.0hrs
- Energy Density: 723Wh/l 259Wh/kg
APPLICATION: a pos terminal, EEG headset, or blood glucose meter
APPEARANCE
Shape: Cylindrical
Can : Steel
Diameter : 18.50mm
Height : 65.00mm
Weight: 46.6g
Nominal Specification of Sanyo NCR18650 BL
| Item | Specifications | Notes | ||
|---|---|---|---|---|
| Rated Capacity | 3200mAh | 0.65A discharge at 20℃ | ||
| Capacity(Minimum) | 3250mAh | 0.65A discharge at 25℃ | ||
| Capacity (Typical) | 3250mAh | Reference only | ||
| Nominal Voltage | 3.6V | 0.65A discharge | ||
| Discharging End Voltage | 2.5V | |||
| Charging Curent (Std.) | 1.62A | |||
| Charging Voltage | 4.20±0.03V | |||
| Charging Time (Std.) | 4.0hours | |||
| Contiuous Discharge Curent (Max.) | 7A | 0~+40°C | ||
| Internal Resistance | ≤ 35mΩ | AC impedance 1 kHz | ||
| Weight | ≤ 49.0g | |||
| Operating Temperature | Charge | 10~+45°℃ | ||
| Discharge | -20~+60°C | |||
| Storage Conditions | ≤ 1 month | -20~+50°C | Recoverable Capacity:80% | |
| ≤ 3 months | -20~+40°C | |||
| ≤ 1 year | -20~+20°C | |||
Electrical Characteristics Tests
| Item | Specifications | Notes |
|---|---|---|
| Full Charge | The battery is charged at a 1.62A constant current until thevoltage reaches 4.20V. The current is then reduced to keep a constant voltage of 4.20V. The total charging time is 4.0 hours at 25°℃. | - |
| Capacity | (1) Within 1 hour after fully charging at 25°C as per item 6.1,the battery is discharged at 0.65A continuously to 2.5V at25°C. (2)Within 1 hour after fully charging at 25°C as per item 6.1,the battery is discharged at 3.35A continuously to 2.5V at 25°C. |
≥ 300min. ≥ 54min. |
| Cycle Life | After the battery has been subjected to 300 repeated chargeand discharge cycles (charged by CC-CV of 1.62A-4.20V for4.0 hours; discharged by CC of 3.25A to 2.5V at 25°C), the discharge time is measured as per ltem 6.2, (2). | ≥ 38min. |
| Temperature Characteristics | (1)Within 1 hour after fully charging at 25℃ as per item 6.1, the battery is stored at 0℃ for 3 hours. The discharge time is then measured as per Item 6.2, (2) at 0°℃. 2) Within 1 hour after fully charging at 25°C as per item 6.1,the battery is stored at 60℃ for 3 hours. The discharge time is then measured as per Item 6.2,(2) at 60°℃. |
≥ 30min. ≥ 50min. |
| Storage at Fully Charged State | After fully charging at 25°C per item 6.1, the battery is stored for 20 days at 60℃ After storage, the battery is held at 25℃for 3 hours. Then, the discharge time is measured as per Item 6.2,(2). Then, the same battery is fully charged again and discharged a second time and measured as per ltem 6.2,(2) at 25°C. |
≥ 30min. ≥ 40min |
| Storage at Fully Discharged State | After fully charging at 25°C, the battery is discharged as per ltem 6.2, (2). Then,the battery is stored for 20 days at 60°C.After storage, the battery is held at 25℃ for 3 hours. Then, the discharge time is measured as per ltem 6.2,(2) at 25°℃. | ≥ 50min |
| Drop | After fully charging at 25℃,the cell is dropped 3 times in random directions from a height og 1M onto a flat surface of concrete. | No rupture, no fire |
STANDARD TEST CONDITIONS:
All tests shall be conducted with new batteries delivered within the last 7 days. Tests shall be pertormed at a temperature of 25±2°C and a humidity of 65±20% (the standard temperature tolerance for Class 2 and the standard humidity tolerance for Class 20, respectively, as specified by JIS Z 8703, Standard Atmospheric Conditions for Testing). The precision of the voltmeter and ammeter used in the tests shall be higher than Class 0.5 as specified by JIS C 1102-2, Special Requirements for Ammeters and Voltmeters
How to Custom 18650 Battery Pack
We have the unique ability to develop custom 18650 battery pack to fit your needs. Our expert team of chemists, engineers, and manufacturers who use proven chemistry and production methods that will get from spec to production fast. Slim, flexible, more powerful.
WHAT WE CUSTOM
WHY CHOOSE US
Requirements
Design
Prototype
Wait for Samples
custom lithium battery packs collection
LG 18650 S3
LG 18650 HE4
LG 18650 B4
LG INR18650 MJ1
LG 18650 HE2
LG 18650 M26
LG 18650 C4
LG 18650 MG1
LG INR18650 HJ2
LG 18650 MH1
LG INR18650 F1L
Sanyo UR18650 AY
Panasonic UR18650 NSX
Panasonic UR18650 PF
Panasonic NCR18650 A
Panasonic NCR18650PD
Panasonic NCR18650 BM
Sanyo NCR18650 BL