Custom Lipo Battery Manufacturer in China

  • More than 500+ Models of Lipo Battery Cell in Stock, Ship Right Now.
  • Custom almost by Any Size, Thickness from 1mm-12mm.
  • 10 Years Experiences Lipo Battery Engineer,Ensure Safety and Performance!
  • Custom Lithium Polymer Battery Capacity from 5mAh-10000mAh
  • Small Set up fees for Custom Lipo Battery Projects.
Get A Quote

Lithium Polymer Battery Applications

Steps to Custom Your Lipol Battery 

1 Custom Lipo Battery Cell

Most customers just want on the shelf Lipo Battery cell, and we have many models for your selection. in this case, please let us know the following:

1 Application of your lipo battery
2 Max size requirement for the lipo battery
3 PCM Requirement
4 Connector Requirement

Since the stock is changing all the time, please contact us for the stock status.

If you have a special request and want to custom your lipo battery, the MOQ is 10K units, we can customize the following:
1 Lipo Battery Size/ Shape
2 Battery Capacity
3 Discharging and Charging C rate
4 PCM (or BMS)
5 Battery Housing
6 Charging and Discharging Connector

2 Choose Battery Management System

Battery Management System (usually short for BMS), which is an electronic regulator that mainly designed to monitor and control the charging and discharging voltage and current of lithium battery cells or other rechargeable cells.

For Battery packs that contain too many battery cells, since battery cells voltage and capacity are not performing the same all the time, that’s why BMS comes out. A BMS is a simple electronics system to measure and control voltage and current. and it will stop charging when the desired voltage is reached.

For example, in 10 cells pack, some battery cell may reach its full capacity already, while others might only 80% full. In case battery cell are already charged full, the BMS will shut down the power flow, in case there is no BMS, the already filled charged battery cell will go on with the charging and thus will short its life or even cause heat or fire.

Our BMS can monitor many more factors such as temperature, humidity,etc.. we can even send data to computer or App, so your customer can read the data on time.

IN STOCK PCM

Custom PCM for Your Lipo Battery

  • Custom Any Size: Small, Big, Round, Strip
  • Custom Voltage Range: 3V ~ 120V
  • Custom Discharge Current: 0.2C ~ 60C (0.1A-200A)
  • Custom Communication Protocols: RS232, RS485, EIA-485, CAN Bus 
  • Monitor Battery Status like SOC, SOH, SOP

lithium battery pack

3 Choose Battery Connector

2 Pin:JST-XH; JST-PHR-2; JST-SH; JST SYR-02T;JST ZHR-2; Molex 51021-0200; Molex 50-37-5023; Molex 78172-0002
3 Pin:JST SHR-03V-S-B; JST ACHR-03V-S; JST PHR-3; JST XHP-3; JST ZHR-3; Molex 50-37-5033; Molex 78172-0003
4 pin: Hirose DF65-4S; JST SUHR-04V; Hirose DF52-2P
Multi Pin:Hirose DF52; Molex 504051; Molex 90156

4 Get Ready for Safety Regulations
Getting Safety certifications for Lithium polymer battery packs now become compulsory steps. We will help you to get all the necessary certificates, some of the commonly known ones are listed below:
UN 38.3
IEC 62133
UL 2054
MSDS
Air Transportation Report

Stock Lipo Battery Cell

Yes, We have the unique ability to develop custom lipo battery cell or packs to fit your needs. Our expert team of chemists, engineers, and manufacturers who use proven chemistry and production methods that will get from spec to production fast. Smaller, thinner, flexible, more powerful.

And we also have many more units on stock, simply drop a message and ask for a catalog.

START My Design

Why DNK

BATTERY SAFETY

  • All Battery cells will pass rigorous testing
  • All Battery Packs are Certified and are compliant with regulatory and safety requirements
  • Cells of Samsung, Sony, LG, ATL are used widely for battery packs.

CERTIFICATIONS

  • CE, ROHS, FCC certification and high reliability
  • UL 1642, UL 2054, MSDS, UN 38.3, IEC 62133,KC,PSE,BIS certifications and more
  • Certificate of Conformance (COC)

BATTERY QUALITY

  • We Make Battery packs with updated battery cells
  • Consistent, reliable, top performance cells from the industry highest quality suppliers.
  • Tested and proven design

CUSTOMER SUPPORT

  • Custom assembly design and engineering assistance
  • Quick turn-around on battery assemblies(10-20 Days)
  • Packaging According to Hazardous Materials Handling policy
START My Design

Let’s Start Design Your Battery!

WE ARE READY FOR YOUR NEXT PROJECT

Please try to answer our following questions, OR Call Us

1 What kind of product will the battery used for? please send us product pictures and
specifications
2 What’s the device voltage and current and if possible peak current
3 How long would you like the device to be used before next charging
4 How much space do you have for the battery?
5 Any special shape requirement? Triangle? Ultra thin? Ultra small? Arc shape?
Curved?
6 What’s your application work condition? Temperature range, and humidity,
outdoor or indoor, moving or stay still?
7 What’s the quantity you need?

ADD:Floor 7,35 Building,Tongfuyu industry park, Hua Fan Road,
Da Lang Street, Bao’An District, Shenzhen City, Guangdong Province, China,518109
Phone: +(86)755 3682 7358
FAX:     +(86)755 6160 5250
Email:   sales@dnkpower.com

Just Shoot Us A Message

Your Name (required)

Your Email (required)

Subject

Your Message